How to install LED rental screens

Installing LED rental screens is a process that requires meticulous operation and professional technical support. The following are the steps to install the LED rental screen according to the search results:

I、Determine the installation location

When you choose the right LED screen, the next step is to install it. The installation location mainly depends on the site conditions of the LED screen, the parameters of the device and other aspects.

1. Site conditions: The installation location of the LED screen is generally indoor, outdoor, etc., and try to choose a bright, flat and well-lit site with good backlight uniformity. For example, in sunny places, such as shopping malls, etc., the environment is relatively good can choose to install on the ground indoors.

2. Equipment parameters: the parameters of the equipment, select the suitable installation location according to the equipment parameters. At the same time, pay attention to the lamps, cables and lines should be matched with the equipment.

II、Connect the base, display, and screen

1.Need to weld the display base to the led screen.

2. Then need to place the display on the screen body after we need to put the screen body on the display base.

3. To connect the display with the screen body, in the screen body and led display base connection when you need to display on the power supply and led display base in the plug on the line.

Note: If the jack cannot be unplugged immediately after plugging into an electrical outlet. It is necessary to tape between the display and the power plug. This effectively prevents a gap between the plug and the screen.

III、Mounting bracket

The led rental screen mounting bracket should try to use the detachable or removable way. As the led rental display needs to be fixed by the various parts, therefore, the choice of bracket should try to use the detachable or removable way, so that it is easy for the site installers to disassemble and adjust the product. 

At the same time, the cost requirements of the bracket itself should be reduced as much as possible. The price of the bracket can fluctuate according to its specifications, size, materials and other comprehensive factors.

IV、Power connection

Led rental screen power connection method, generally is the first display on the power plug, and then turn on the power indicator. But the LED screen is all independently controlled, so in order to control its brightness, another control power supply is also needed. Of course, there are also multiple power supply controls. 

At the same time, in order to avoid mutual interference between different power supplies or affect the performance of the product, the plug of the power supply should be plugged into one of the power outlets.

V、Check the inventory

After the installation of the LED rental screen cabinet and bracket must be comprehensively and meticulously inspected, if any defects and failures should be repaired in a timely manner and clean up the scene, to ensure that the cabinet is working properly, otherwise it will affect its display effect, and there may be great potential safety hazards.